The local rules on a Anaheim roof

The statewide layer

These are not specific to Anaheim, but they apply to it, and several of them are widely got wrong — including by contractors quoting from habit rather than from the current code.

Tear-off waste and where it goes

CALGreen’s 65 per cent diversion requirement for construction and demolition waste attaches to additions and alterations that increase a building’s conditioned area, volume or size. A straight re-roof does none of those, so the state mandate generally does not reach it.

Local ordinances frequently do, and the state code expressly lets a city be stricter. Plenty of cities capture roofing through their own construction and demolition rules by permit valuation, which can mean a deposit and a diversion report on an ordinary house. Ask the city before the skip is ordered rather than after.

Licensing, deposits and what has to be on the paperwork

Roofing sits under the C-39 classification at the Contractors State License Board. The small-job exemption that permits unlicensed work rose to $1,000 in January 2025, but it does not extend to work needing a permit, and a re-roof needs one. So the rule that matters is the simple one: a re-roof requires a licensed contractor, at any price.

The deposit is capped by statute. A home improvement contractor may not take a down payment of more than $1,000 or ten per cent of the contract, whichever is less, unless they have a blanket performance and payment bond on file with the board. Exceeding it is a misdemeanour, and in a declared disaster area the court is required to impose the maximum fine — which tells you how commonly it is attempted after a storm.

Every licensed contractor is required to put the licence number in all advertising, and in contracts, subcontracts and bids. An advertisement without one is itself a signal. The board's own register will confirm a number in under a minute, and it is worth the minute.

The deductible, and the California version of the warning

Unlike Texas or Florida, California has no roofing-specific statute banning a contractor from covering your deductible. That is not permission — the illegality is in the mechanism. Billing the insurer the full amount while collecting less than that from you puts a false statement of material fact into the claim, and knowingly presenting a false or fraudulent insurance claim is a felony under Penal Code section 550, with prison exposure and fines up to $50,000 or twice the fraud.

The homeowner who agreed to the arrangement is a party to it. This is worth being blunt about because the offer is made constantly after storms and is almost always framed as a favour.

The right to cancel

The standard cancellation window on a home improvement contract is three business days, five for a senior citizen. Where the contract is to repair or restore damage from a disaster or a declared state of emergency, it is seven business days.

That longer window exists because of what happens on a street after a storm. Nothing has to be signed at the door — and if something was, the clock above is why it is worth re-reading tonight rather than tomorrow.

Fire classification: what is actually required, and where

Every ordinary re-roof has to meet at least a Class C fire-retardant covering. That floor applies to new roofs, to repairs and replacements, and to any existing building where over half the roof area is replaced inside a year.

Class A, the highest classification, is required where the property sits inside a fire hazard severity zone or a wildland-urban interface area, and many cities require it more widely by local ordinance. In practice, across most of south Orange County, Class A is the answer — but it comes from the fire zoning and the local ordinance rather than from a blanket statewide rule, so it is worth confirming for your address rather than assuming either way.

As of 1 January 2026 the wildfire rules live in their own book: the California Wildland-Urban Interface Code, Title 24 Part 7, which consolidated what used to be Chapter 7A of the building code and section R337 of the residential code. A contractor still citing Chapter 7A is citing something that has been superseded.

What a wildfire-zone roof actually has to include

In a mapped fire hazard zone the requirements reach well past the covering, and they are the details that separate a compliant roof from a cheap one. Embers, not flame fronts, are what destroy most houses in a wildfire, and every one of these requirements is about closing a gap an ember could get through.

• A roof assembly meeting Class A when tested to ASTM E108 or UL 790
• On profiled tile, bird stops at the eaves and hip and ridge caps mudded in, so there is no open end for embers to enter
• Valley flashing of at least 0.019 inch (26 gauge) corrosion-resistant metal, over a mineral-surfaced cap sheet at least 36 inches wide
• Noncombustible gutters and downspouts, with an approved means of stopping leaves and debris collecting in them
• Vent screening of noncombustible corrosion-resistant mesh, no finer than 1/16 inch and no coarser than 1/8 inch